How Do You Paint Your House Walls Quickly?


Painting the corners of a room has always
been at least a two step process. Well, not any more. This is a brand new product. What
we’ve done with this product is we’ve combined the speed of a roller with the accuracy of
a paint brush. No one’s ever done this before. So the way it works is the brush fits right
here on the shield behind the roller. Put paint on the roller like this… load it up nice a
good… saturate the roller… close your shield … you come up to your edge like — say
this is a door frame or window frame or ceiling, or whatever you want to paint up to — and really, all you need to
do is put the roller on the wall, roll down, roll up, roll down, The secret to this device is a tiny paint
brush that spreads the paint right to the edge of the wall where your roller can’t go. That brush paints that little gap right here.
So the roller puts paint on the wall, the brush picks up paint right here, and moves
it over to the edge. And you can see, it gives you a very, very sharp edge. Cutting in is so frustrating! Taping takes
forever! There’s got to be a better way. Introducing Accubrush. The most remarkable
paint edging system available today. Accubrush works great around crown molding, ceilings,
door frames, window trim, baseboards, textured walls, accent walls. This is great — I can’t wait to use it on
my fixer-upper house I just bought . I’m very impressed with how easy it is to
use. Other edging products leave behind a ragged,
unfinished line. Only the Accubrush has the fine line brush which moves the paint to the
very edge. It cuts right into the edge, right where it’s
supposed to be. It’s going to save me a ton of time, is what
it’s going to do. Using the Accubrush was a lot easier than
using the paint brush. I liked it! I want one! What we’ve developed is a new paint edger.
It combines the speed of a roller with the accuracy of a paint brush. This paint brush
has been specially designed to paint right up the edge so that you don’t have to worry
about taping or masking off anything. So, it’s the roller, and a brush. And the shield
here allows you to open it up, roll paint on the roller, close the shield, start away
from wall a little bit, and.. I’m done. Now, look how close that is! You can’t get anywhere
this close with your hand, by using tape, or by any other method. Like I said, it’s a roller, and then the brush
fits in behind it, and the brush is what’s actually doing the final cutting, and that
is what allows you to get right up the edge. Without that brush, this doesn’t work. So,
the roller basically puts paint on the wall, and then the brush comes behind it, and moves
that paint right up to the edge. So you’re never actually putting paint on the brush
itself. So it makes it a very fast operation. The consistency and results of the painting
job when you are finished are amazing. They are very accurate. They are as good as a professional painter. The
Accubrush will save you enormous amounts of time, especially along ceilings. Ceilings
are notoriously the most difficult part of edging, especially since you have to carry
your paint with you on the ladder if you want to brush it in. You often can’t tape a ceiling,
because the tape won’t stick, or there’s texture on the ceiling, or whatever else. With the
Accubrush, it doesn’t matter if there’s texture on the ceiling, it will allow you to paint
right up to that edge, quickly and cleanly. Now look how close that is. The biggest advantage
of the Accubrush is that it will give you professional quality results very quickly
and easily, at a fraction of the cost. Cutting in paint is so frustrating! Taping
takes forever! There’s got to be a better way… Introducing Accubrush, the most remarkable
paint edging system available today. This is a brand new product. What we’ve done with
this product is we’ve combined the speed of roller with the accuracy of a paint brush.
You put paint on the roller like this, roll down, roll up, roll down, It gives you a very
very sharp edge. The secret to this device is a tiny paint brush that spreads the paint
right to the edge of the wall, where your roller can’t go. The roller puts paint on
the wall, the brush picks up the paint right here, and moves it over to the edge. Accubrush works great around crown molding,
ceilings, door frames, window trim, baseboards, Using the Accubrush was a lot easier than
using the paint brush. I liked it! I want one! Get started using the amazing Accubrush
today! Hurry! Order yours today.

12 comments

yeah….I don't know….my lines are laser straight because I know what I'm doing…this is for ppl who don't
Get a good synthetic fine brush by Z!bra at homedepot $10

This tool is absolute garbage. See my video review of how bad it actually is. Classic that I gave it a bad review and they continue to advertise on my channel.

Leave a Reply